router – Bivocom https://www.bivocom.com Wireless solutions for IoT and M2M Tue, 01 Aug 2023 06:22:08 +0000 en-US hourly 1 https://wordpress.org/?v=5.2.21 https://www.bivocom.com/wp-content/uploads/2019/11/cropped-favicon_1-32x32.png router – Bivocom https://www.bivocom.com 32 32 How to Setup VXLAN? https://www.bivocom.com/blog/how-to-setup-vxlan https://www.bivocom.com/blog/how-to-setup-vxlan#respond Tue, 01 Aug 2023 03:33:41 +0000 https://www.bivocom.com/?p=3225 Communication mode of VXLAN (1) Routing mode: Communication between different network segments  End to End communication: The two end devices establish a direct VXLAN tunnel, through which all data traffic is transmitted. The subnets on both devices form a unified Layer 2 subnet.   Multiterminal forward communication: The objective is to establish a VXLAN tunnel […]

The post How to Setup VXLAN? appeared first on Bivocom.

]]> https://www.bivocom.com/blog/how-to-setup-vxlan/feed 0 What is VXLAN? And its role in IoT? https://www.bivocom.com/blog/what-is-vxlan-and-its-role-in-iot https://www.bivocom.com/blog/what-is-vxlan-and-its-role-in-iot#comments Thu, 27 Jul 2023 08:51:26 +0000 https://www.bivocom.com/?p=3211 What is VXLAN? VXLAN, which stands for Virtual Extensible LAN, is a network virtualization technology that allows the creation of virtualized Layer 2 networks over an existing Layer 3 infrastructure. It was developed to address the scalability limitations of traditional VLANs (Virtual Local Area Networks) in large-scale data center environments.   VXLAN encapsulates Layer 2 […]

The post What is VXLAN? And its role in IoT? appeared first on Bivocom.

]]> https://www.bivocom.com/blog/what-is-vxlan-and-its-role-in-iot/feed 2 How to Enable MQTT Broker? https://www.bivocom.com/blog/how-to-enable-mqtt https://www.bivocom.com/blog/how-to-enable-mqtt#comments Tue, 25 Jul 2023 08:01:13 +0000 https://www.bivocom.com/?p=3193 Foreword In this case, we will need 2pcs TR321 and a PC, one of it works as MQTT Broker, another TR321 and PC works as MQTT Client. All of these devices connected with the same LAN of gateway.   MQTT Broker Settings (1) Open the WEBUI of MQTT Broker router, check the network status, the […]

The post How to Enable MQTT Broker? appeared first on Bivocom.

]]> https://www.bivocom.com/blog/how-to-enable-mqtt/feed 2 Cons and Pros of MIPS, ARM and x86 in IIoT Industry https://www.bivocom.com/blog/cons-and-pros-of-mips-arm-and-x86-in-iiot-industry https://www.bivocom.com/blog/cons-and-pros-of-mips-arm-and-x86-in-iiot-industry#respond Sun, 25 Jun 2023 02:28:09 +0000 https://www.bivocom.com/?p=3163 This article tells you what is MIPS, ARM and x86, their differences, as well as advantages and disadvantages of them for IIoT industry, and their usage for IoT routers.   What is MIPS? MIPS or Microprocessor without Interlocked Pipelined Stages, is a reduced instruction set computing (RISC) architecture developed by MIPS Technologies, Inc. MIPS processors […]

The post Cons and Pros of MIPS, ARM and x86 in IIoT Industry appeared first on Bivocom.

]]> https://www.bivocom.com/blog/cons-and-pros-of-mips-arm-and-x86-in-iiot-industry/feed 0 How to use Putty to login Bivocom router? https://www.bivocom.com/blog/how-to-use-putty-to-login-bivocom-router https://www.bivocom.com/blog/how-to-use-putty-to-login-bivocom-router#comments Tue, 09 May 2023 02:07:32 +0000 https://www.bivocom.com/?p=3099 Open Putty, chose connection type as Telnet, port 23. （Bivocom router） Enter username and password, both are admin. Now you are able to send commands here.

The post How to use Putty to login Bivocom router? appeared first on Bivocom.

]]> https://www.bivocom.com/blog/how-to-use-putty-to-login-bivocom-router/feed 2