Archives of Blog

OpenWrt banner
Blog

How to Set Up IoT Gateway Under Latest OpenWrt 22.03.0?

This article shows you how to set up basic configuration of Bivocom 5G&4G IoT gateway TG453 and TG463 under latest OpenWrt version 22.03.0 environment.   What You Need? Bivocom TG453, TG463 IoT Gateway with latest Openwrt version 22.03.0 built-in An IoT developer with knowledge of OpenWrt   Steps of Settings and Configurations 1. Login Web […]
Read More
Blog

How to Connect IoT Routers/Gateways to Bivocom IoT Platform?

In this article, we’re going to tell you how to connect your IoT routers or gateways to Bivocom IoT platform.   1. What You Need? Bivocom IoT Router or Gateway  TR321, TR341, TG451, TG452, TG462(S), TG453, TG463 Bivocom IoT Platform Demo Bivocom provides customizable web page based IoT platform with on premise service. The platform […]
Read More
bus wifi advertising, taxi wifi advertising
Blog

How to Configure Bivocom TG451 Captive Portal for HotspotSystem?

This quick guide tells you how to quickly configure Bivocom IoT Gateway TG451 captive portal and Coova Chilli for Hotspots System users.   What You Need?   Bivocom Router TG451 Bivocom TG451 is an industrial IoT gateway designed for applications like vehicle WIFI, water pump station, power substation, traffic light, etc. Bivocom designed a customized […]
Read More
Blog, News

How to Connect Bivocom IoT Router to Ubidots via MQTT?

This quick guide tells you how to quickly connect Bivocom IoT Router TR321 to Ubidots cloud IoT platform and send data via MQTT.   What You Needs   Modbus Slave Tool A tool to simulate an IoT sensor to send data in Modbus protocol.   Bivocom 4G IoT Router TR321 An industrial IoT router for […]
Read More
Blog

4 Steps to Set Up RTC Time on Industrial IoT Router TR321

This quick guide tells you how to set up RTC time on Bivocom industrial IoT router TR321 in just 4 steps. Before we get started, let’s figure out what is RTC(real time clock). 1. What is RTC? An RTC(real time clock) is built in electronic devices including IoT sensor, IoT router, gateways, RTUs, and computers, […]
Read More
banner
Blog

How to Upgrade IoT Gateway TG451 by RS232 Cable?

This article tells you how to use the USB to RS232 Cable (if your laptop doesn’t have RS232 port, a USB to RS232 converter is required) to upgrade your TG451 with latest version of firmware.   You may wonder why shall I use RS232 cable to upgrade firmware of TG451? Normally, TG451 supports firmware upgraded […]
Read More
OPC UA
Blog

How to Enable OPC UA on IoT Gateway

This quick guide tells you how to enable OPC UA on Bivocom IoT gateway in just 4 steps, and collect OPC UA data from IoT gateway in JSON format. 1.    Basic Setting Enable or disable the data collect feature, setting the data acquire and report period and other related options. Data Collect: Enable or disable […]
Read More
TR321 diagram
Blog

How to Transfer the Data from RTU to IoT Router?

How to transfer the data from your field RTU to an IoT Router via RS232/RS485 transmission mode or MQTT mdoe?  This article may help you. Example: Below are questions from a customer who wants to upgrade its field RTU data to cloud by using a 4G IoT router.   I have a question to ask […]
Read More
Industrial router 2-LAN TR321 bivocom
Blog

3 Steps to Upgrade Firmware on IoT Router

Bivocom IoT Router supports firmware upgrade via WEB UI, this quick guide tells you how to quickly upgrade firmware to Bivocom IoT Router TR321 in just 3 steps.   Note: As different hardware version may require different firmware version, so please contact Bivocom support team([email protected]) before you upgrade the firmware yourself, and check the label […]
Read More
Telecom site monitoring 1
Blog

Remote Telecom Site Monitoring System

Today, we’re going to share with you the IoT based remote telecom site monitoring system, and in this article, you’ll learn what is telecom site, what systems are telecom site consisted of? What is remote telecom site monitoring system, why we need it?   Let’s get started.   What is Telecom Site? Telecom site has […]
Read More
Python and IoT
Blog

3 Steps to Run Python Program on IoT Gateway

This quick guide tells you how to quickly run Python program on Bivocom 5G NR IoT Gateway TG463 in just 3 steps. Before you start, make sure your firmware version is Python programmable version or later. Bivocom463-63.1.0.14-python3.4-202206151537.img Note: Standard firmware version of TG463 doesn’t support Python programmable, so you’ll have to ask Bivocom team to […]
Read More
Blog

3 Steps to Enable Node-RED of Bivocom TG452

Bivocom TG452 provides customized firmware of Node-RED for IoT developers and designers, this quick guide tells you how to quickly enable Node-RED of TG452 in just 3 steps. Note: Node-RED is only available on customized firmware of TG452, if you need it, please tell Bivocom sales rep. before you order it.   Check IP of […]
Read More
We use cookies to deliver you the best experience. By browsing our website you agree to our use of cookies.
Got it